Upload failed. Maybe wrong permissions?
http://reprap.org/wiki/Prusa_Mendel
https://github.com/prusajr/PrusaMendel
Sanguinololu
bt modul:
http://www.rasmicro.com/Bluetooth/HC%20Serial%20Bluetooth%20Products%20201104.pdf
Hotend
Vitamins
Nuts & bolts
- 3x 608 skate bearing - 4x M4 nut - 3x M3 10mm screw - 2x M4 25mm screw - 1x M8 hobbed bolt - 8x M3 15mm screw with HEX head - 2x M3 10mm screw with hex head - 1x M3 25mm screw - 1x M3 grub screw - 2x M3 25mm screw with HEX head - 12x M3 nut - 73x M8 washer - 74x M8 nut - 29x M3 washer - 1x M3 10mm screw with flat head - 2x M3 40mm screw
Rods
Timing belts
reprapworld
Electronics
reprapworld | 5 | NEMA 17 bipolar stepper motor Stepper Be sure to get ones with at least 20mm of shaft length. Shorter shafts require modifications to the X pulley assembly and Z motor couplers. One of the five motors, for use with the extruder, should be capable of creating a holding torque of at least 40Ncm, at the very least. |
50 | small cable binder / ziptie Misc |
reprapworld | 1 | Electronics |
3 | endstops |
3d_tisk/prusa_mendel.txt · Last modified: 2019/11/27 16:50 by 127.0.0.1